Tanodized LW-Skeletonized AR-15 80% Receiver Set

Original price was: $279.99.Current price is: $249.94.

Still Available: No Serial Number or FFL

(5 customer reviews)

Out of stock

All machining processes for our skeletonized AR15 80% Lower are completed other than drilling/milling the FCG (Fire Control Group) pocket and trigger slot, and drilling the Selector switch, Trigger and Hammer pin holes.

Anodized LW-Skeletonized AR-15 80% Receiver Set Includes:
Ltd lifetime warranty against manufacturer defects
– Anodized Black per mil-a-8625 type 3 class 2

Lower Receiver:
– CNC Machined from 6061-T6 Billet Aluminum
Rear lug pocket already machined
– ‘Pictogram’ style Fire-Safe Engravings
– LightWeight FCG Faces and Skeletonized Mag-well
– Integral trigger guard for added overall strength
– Machined (not broached) Mag-well with wide flare

Upper Receiver:
– CNC Machined from 6061-T6 Billet Aluminum
– Sleek and low-weight No-FA slick-side design
– LightWeight Inset Faces on Sides
– Accepts standard ejection port cover, pin and spring
– Close in slim-line case deflector
– Built to mil-spec dimensional standards

Optional:

– 7075-T6 Billet Aluminum (when Available)
– Bolt release pin hole Drilled and Tapped 6-32

Availability:

Although not generally restricted, you should refer questions regarding manufacture, NFA Regulations, and individual state regulations to the BATFE, your local law enforcement or obtain legal guidance prior to manufacturing. All NFA Rules apply.

No FFL Required!  This anodized AR15 80% receiver set can be securely purchased from our website, and shipped direct to your home or business. (See the Shipping/Returns webpage for updated Shipping Restrictions)

5 reviews for Tanodized LW-Skeletonized AR-15 80% Receiver Set

  1. Anonymous (verified owner)

    Looking to make a pistol/ rifle matched set and the color was perfect.

  2. James D. (verified owner)

    Nice product and service. The anodizing is a little off in color from the upper and lower but it’s OK 👍

  3. Anonymous (verified owner)

    Last one I will receive until we change our laws.

  4. Niel W. (verified owner)

    For $310 shipped, after about 4 weeks or more, I guess I expected too much. There was some corrosion buildup in the front takedown spring/pin hole, the trigger hole was not drilled all the way into the fire control group, the buffer tube threads were too tight, and the machining on the inside of the upper was not very fine (I could catch my fingernail on several spots), no one machined in m4 feedramp extensions into the upper, and the anodizing is very thin, the outside looks good (must have sandblasted that), and the upper and lower fit together nicely. Also didn’t notice before, but there is no brass deflector, not nice to have hot brass flying toward your face. Overall not super happy. But can’t return it as it is already built and late to the customer.

    • Dan – Machinist (store manager)

      Niel, we’re sorry to hear that you had some issues, and are not completely satisfied with your Rcvr Set. Thank you for the feedback, and we understand that there are a few more details to watch for. The corrosion in the detent hole is a left-over from the Anodizing process where the parts are rinsed at completion, and they are then blow dried. We’re not blaming them, but its not something that we typically check when the parts return. And we check every 8-10 Lowers coming off the CNCs for the buffer tube fit, but that is in the Raw and we don’t check again after coatings. The bore in the Upper is not normal but entirely possible, and we do not do the M4 feed ramps in our Uppers at this time but most likely will in the near future. We would like to comp you for your situation in some way so we will reach out by email.

  5. Eric R. (verified owner)

    I love the support this crew gives you.

Add a review