All machining processes for our billet SR25 type AR-10 80% Receiver Set are completed other than drilling/milling the FCG (Fire Control Group) pocket and trigger slot, and drilling the Selector switch, Trigger and Hammer pin holes.
Note: IF you have both the Upper and Lower Receiver (the Set), then you can attach most DPMS Gen 1 components. You do not have to purchase SR25 compatible components.
Raw Billet SR25 style .308 80% Receiver Set Includes:
– Ltd lifetime warranty against manufacturer defects
Lower Receiver:
– CNC Machined from 6061-T6 Billet Aluminum
– Rear lug pocket already machined
– ‘S/F’ Text style Fire-Safe engravings on both sides
– Integral trigger guard for added overall strength
– Machined (not broached) Mag-well with wide flare
Upper Receiver:
– CNC Machined from 6061-T6 Billet Aluminum
– Sleek and low-weight No-FA slick-side design
– Accepts standard ejection port cover, pin and spring
– Close in slim-line case deflector
– Built to industry dimensional standards
– Barrel Nut thread pitch is 1-7/16 x 16
– Our 308 Uppers are built to the Low-Profile spec
Optional:
– 7075-T6 Billet Aluminum (when Available)
– Bolt release pin hole Drilled and Tapped 6-32
– Glass Bead Blasted finish
– Black Anodized
– Standard Cerakote colors:
Burnt Bronze, FDE (Shown), Graphite Black, OD Green or Tungsten Grey
– Custom Cerakote Color [View Here]
Compatibility:
Our billet SR25 type AR10 80% receiver set uses a standard DPMS lower parts kits (LPK) including the pins. Plus it accepts standard .308 DPMS / SR25 / P-Mag Gen 2-3 Magazines.
Shipping Restrictions:
Although not generally restricted, you should refer questions regarding manufacture, NFA Regulations, and individual state regulations to the BATFE or your local authorities, or obtain legal guidance prior to manufacturing. All NFA Rules apply.
No FFL Required! This SR25 style AR 10 .308 80% Receiver Set can be securely purchased from our website, and shipped direct to your home or business. (See the Shipping/Returns webpage for updated Shipping Restrictions)
Bryan P. (verified owner) –
It may take a while, but it is definitely worth it!! Y’all produce some amazing products. (owner even reached out to me to update me on the progress of my matched upper/lower) this is my second purchase and will definitely buy from y’all again!!
Respectfully: Bryan P.
Donald S. (verified owner) –
Excellent!
Daniel J. (verified owner) –
Just as the description described the set. I will say this, looking back I probably should have waited the 1-2 days to get it bead blasted, but I think it fine for me. I have to hunt down a look-a-like handguard like an A2 quad rail. Hard to find when sizing up this set to get it to look closer to a clone M110. But hey one day at a time. Great site, glad to find it and do business with them.