All machining processes for our cerakote LightWeight SR25/DPMS type AR-10 80% Receiver Set are completed other than drilling/milling the FCG (Fire Control Group) pocket and trigger slot, and drilling the Selector switch, Trigger and Hammer pin holes.
Note: IF you have both the Upper and Lower Receiver (the Set), then you can attach most DPMS Gen-1 components.
You do not have to purchase SR25 compatible components.
Cera LightWeight SR25/DPMS style .308 80% Receiver Set Includes:
– Ltd lifetime warranty against manufacturer defects
Lower Receiver:
– CNC Machined from 6061-T6 Billet Aluminum
– Rear lug pocket already machined
– ‘Pictogram’ style Fire-Safe Engravings
– Added overall strength from integral trigger guard
– Machined (not broached) Mag Well with wide flare
Upper Receiver:
– CNC Machined from 6061-T6 Billet Aluminum
– Sleek and low-weight No-FA slick-side design
– Accepts standard ejection port cover, pin and spring
– Close in slim-line case deflector
– Built to industry dimensional standards
– Barrel Nut thread pitch is 1-7/16 x 16
– Our 308 Uppers are built to the Low-Profile spec
Optional:
– Bolt release pin hole Drilled and Tapped 6-32
– Cerakote Burnt Bronze (Pictured)
– Cerakote FDE (Flat Dark Earth)
– Cerakote Graphite Black
– Cerakote Tungsten Grey
– Cerakote Custom Color [View Here]
Compatibility:
Our LightWeight SR25/DPMS type AR10 80% receiver set uses a standard DPMS lower parts kits (LPK) including the pins. Plus it accepts standard .308 DPMS / SR25 / P-Mag Gen 2-3 Magazines.
Availability:
Although not generally restricted, you should refer questions regarding manufacture, NFA Regulations, and individual state regulations to the BATFE or your local authorities, or obtain legal guidance prior to manufacturing.
No FFL Required! This cerakote SR25/DPMS style AR 10 .308 80% receiver set can be securely purchased from our website, and shipped direct to your home or business. (See the Shipping/Returns webpage for updated Shipping Restrictions)
Joe B. (verified owner) –
Overall fit and finish was good. Very pleased with my purchase.
Grant S. (verified owner) –
Grant S. (verified owner) –
Updating my review, I love the color and the design but the upper was too snug, my BCG was getting stuck half way down the tube. Double checked my BCG on a buddies 308 and it worked fine. Took some fine sand paper to the 4 inside edges causing it to bind and all is well. Also not sure if anyone else ran into the trigger pin holes + selector hole being a bit to low relative to the design on the outside or just me but I would look into it if I was the designer. Covered everything up with dog bone links and ambi safety.
Franklin G. (verified owner) –
Upper & Lower were individually wrapped for shipping great care was taken to ensure no damage
Jacob S. (verified owner) –
The fit up is great and feels like a matched set. Solid machine work and good finish!